123

Original USA Dwyer 2000--2300-00 Dwyer 2000--2300-0 Dwyer 2000--2301 Dwyer 2000--2302 Dwyer 2000--2304 Dwyer 2000--2310 Dwyer 2000--2320 Dwyer 2000--2330

Product Name:*
Name:
E-mail:*
Message:*
Original USA Dwyer 2000--2300-00 Dwyer 2000--2300-0 Dwyer 2000--2301 Dwyer 2000--2302 Dwyer 2000--2304 Dwyer 2000--2310 Dwyer 2000--2320 Dwyer 2000--2330

Select the SERIES 2000 Magnehelic® Gage for high accuracy--guaranteed within
2% of full scale--and for the wide choice of 81 models available to suit your needs
precisely. Using Dwyer’s simple, frictionless Magnehelic® gage movement, it quickly indicates low air or non-corrosive gas pressures--either positive, negative (vacuum) or differential. The design resists shock, vibration and over-pressures.


SPECIFICATIONS
Service: Air and non-combustible,
compatible gases (natural gas option
available). Note: May be used with
hydrogen. Order a Buna-N diaphragm.
Pressures must be less than 35 psi.
Wetted Materials: Consult factory.
Housing: Die cast aluminum case and
bezel, with acrylic cover. Exterior finish
is coated gray to withstand 168 hour salt
spray corrosion test.
Accuracy: ±2% of FS (±3% on -0,
-100PA, -125PA, -10MM and ±4% on
-00, -60PA, -6MM ranges), throughout
range at 70°F (21.1°C).
Pressure Limits: -20 in Hg to 15 psig†
(-0.677 to 1.034 bar); MP option: 35 psig
(2.41 bar); HP option: 80 psig (5.52 bar).
Overpressure: Relief plug opens
at approximately 25 psig (1.72 bar),
standard gages only.u
Temperature Limits: 20 to 140°F*
(-6.67 to 60°C). -20°F (-28°C) with low
temperature option.
Size: 4˝ (101.6 mm) diameter dial face.
Mounting Orientation: Diaphragm in
vertical position. Consult factory for other
position orientations.
Process Connections: 1/8˝ female NPT
duplicate high and low pressure taps -
one pair side and one pair back.
Weight: 1 lb 2 oz (510 g), MP & HP 2 lb
2 oz (963 g).
Standard Accessories: Two 1/8˝ NPT
plugs for duplicate pressure taps, two
1/8˝ pipe thread to rubber tubing adapter,
and three flush mounting adapters with
screws. (Mounting and snap ring retainer
substituted for three adapters in MP &
HP gage accessories.)
Agency Approvals: Meets the technical
requirements of EU Directive 2011/65/EU
(RoHS II). Note: -SP models not RoHS
approved.
Note: For applications with high cycle rate within gage total pressure rating, next
higher rating is recommended. See Medium and High pressure options.
*Low temperature models available as special options.


Original USA Dwyer 2000--2300-00 Dwyer 2000--2300-0 Dwyer 2000--2301 Dwyer 2000--2302 Dwyer 2000--2304 Dwyer 2000--2310 Dwyer 2000--2320 Dwyer 2000--2330

About Us

About Us

Xi`an Ao Xin Automation Instrument Co., Ltd., is located in Xi`an city which is the authoritive centre of instrument and gauge .It is cooperated with many related domestic cooperation to research ,sale and service and also obtained the cert of ISO9001-2008. overall strength of the industry 's leading domestic well-known enterprises .Over the years, the company under the "integrity, innovation , development and harmony " principle of service .

Contact Us

Website:http://www.aosoonyb.com
TEL:+86-029-86691808-803
                   +86-029-84381810-803
          FAX:+86-029-89390083
Email:xaaxyb@126.com          Email:wsb2828@126.com

Top
点击这里给我发消息 xaqksm wang01-Send Email  Amber
 E-mail:wsb2828@126.com
My status
My status