UE pressure switch J120-616
Features:
· (SPDT or DPDT) output single-point switch Welding stainless steel diaphragm
* Ultra low pressure, inches of water level Optional sensor material for corrosive media
· Polished stainless steel sanitary link
Technical parameters:
Storage temperature: -54 ~ 71 ℃
Ambient temperature: -40 ~ 71 ℃; or -18 ~ 71 ℃, 28 ℃ ambient temperature changes by the set point typical drift of less than 1%.
Impact: After 15G, 10 ms cycle test can reproduce the set point
Anti-Vibration: The 2.5G, 5 ~ 500HZ vibration test, can reproduce the set point
Switching output: a single-pole double-throw (SPDT) snap action switch can be connected to a "normally open" or "normally closed.". Some models Optional double-pole double-throw (DPDT).
Power rating: 15 amps 125/250/480 VAC.
Power rating: 15A, 125/250 / 480VAC
Electrical connection: 1/2 "NPTF or 3 / 4NPTF
Pressure connector: 1/4 "NPTF or 1 / 2NPTF or sanitary connection
Diaphragm material: welded 316L stainless steel diaphragm, nitrile rubber (Buna-N) film, fluorine rubber diaphragm, diaphragm Hastelloy C, Monel diaphragm manganese, tantalum diaphragms, bellows bronze
Pressure connection Material: 316L stainless steel aluminum nickel-plated brass pressure port Pressure port
Application:
120 series can be widely used in chemical plants, oil refineries, drilling platforms, pipelines and coal, grain dust areas. Micro pressure sensors are suitable for furnace ventilation, potting systems and low pressure pipeline applications. In the selection of industrial pressure on or temperature switch. Safety is the most important factor. 120 series products to meet UL, CSA, FM and CENELEC standards can be used for explosive areas and strong corrosive atmosphere environments. equipment protection and personnel safety applications.
English
中文.jpg)
TEL:+
Email:xaaxyb@126.com
Email:wsb2828@126.com
xaqksm
